Capacitive Fuel Sensor 0 - 5V

Capacitive Fuel Sensor 0 - 5V

Capacitive fuel sensor 0 - 5V Parameters: Feature: * Measuring accuracy:0.1% * The Length can be cut. * Length can be customized made. definition of the output line: 0~5V output [ CLS2-700 A ]; 4~20 mA output [ CLS2-700 B]; RS232 output [ CLS2-700C ]; RS485output mode( CLS2-700 D) Fuel sensor...
Chat Now

Product Details

Capacitive fuel sensor 0 - 5V


Parameters:

SpecificationData
Examination area: 100~1000mm
resolution ratio:0.1%
Measuring accuracy:0.1%
Maximal error of measure1mm
heat-resistant-40~150
DiameterΦ18mm
Length700mm, 600mm,30mm etc, can be customized
Output signal4~20mA,0~5V, RS485, RS232, CAN bus
Voltage supplyDC7~42V
Rated supply0.1W
Pressure range-0.1MPa ~ 0.1 MPa
Fixed typeScrew installation M20X1.5 OR Flange mounting


Feature:

* Measuring accuracy:0.1%

* The Length can be cut.

* Length can be customized made.


definition of the output line: 

0~5V output [CLS2-700A];     4~20 mA output [CLS2-700B];

RS232 output [CLS2-700C];    RS485output mode(CLS2-700D)


Fuel sensor installation method:

1, Cut a hole on the tank.

2, Use rubber mat.

3, Install the fuel sensor.

4, wire the cables.

5, validate the sensor (If cut the lenght)


Install capacitive fuel sensor.jpgfuel sensor.jpgcapacitive fuel sensor.jpgfuel sensor installation.jpg


Validate:

When need cut length, before use the fuel sensor, need validate. 

Pethod:

1, open the cover of the fuel sensor

2, connect with the interface of the validator and sensor.

3, full the tank, then press "F"

4, after about 2 mins, empty the tank, then press "E" 

5, finishd.

fuel sensor validate.JPG

validator.jpg


Inquiry