2pieces SD Card,each max 128GB SD Card, mirror recording to protect data from loss
Support USB flash disk updating,SD card upgrade , OTA remote upgrade automatically
H.264 General video format
Special FAT32 File System
Front panel supports USB port, support USB flash disk upgrade to backup; hard disk box USB port, can back up video data
Search video by Record Time/Record Type etc
Max support 4CH Replay /Stop/Fast Forward/Fast Reverse at same time
Support x 2,x4,x8,x16. fast forward or fast backward play
User/Admin 2 Levels Different Passwords , support screen lock
TTS Voice Broadcast
Support the TTS Voice Broadcast function
Serial Port Extension
Support kinds of Access Equipment such as LED Advertising, PTZ control, Oil Fuel Sensor,etc.
Adaptive wide power input, support Wide Voltage, Over-load、Over-voltage、Short Circuit、Reverse Protection..Support Time Setting/Delay power off
This menu is to query device operation and working log , you can choose the same type log via log categories.
When select a single log, press the keys to quickly flip over, and press to turn to first page or last page.
This menu is mainly for searching the screenshot pictures.
Zoom up single full screen will auto screen capture by default , it will be triggered by the alarm linkage or manually operate.
**** Pictures and device log all save in the second partition ****
Under System Setup menu includes: Power, time setup, user setup, terminal setup (menu setup and modifying need to choose save to take effect)
By remote control input settings: device number, phone number, license plate number, the provincial domain ID, the City ID, terminal type, manufacturer ID, terminal ID, the device management (data in accordance with the Department of standards, Chinese input can use the soft keyboard input)
Q:Device keep Rebooting
A:1)Check working power,if low power device will keep rebooting;
2) HDD/SD Card error, remove storage device and turn on device checking;
Q: If the video input interface of the device and camera is different.
A:The DVR is using 4 needle type port, the camera is BNC port or Aviation, if it is different, please use the X-over to connect, or connect according to the DVR Line sequence definition
Q:Device on with HDD but not recording;
A:1)Check SD/HDD if format;if not please enter Main GUI--System Set--Format,format HDD/SD Card;
2)If close Recording ,or set Timed Recording mode, if yes it won’t recording if not the time set
3)If the HDD is connect well, if the HDD/SD light is on.