Mobile DVR with WiFi
Front panel supports USB port, support USB flash disk upgrade to backup; hard disk box USB port, can back up video data
Search video by Record Time/Record Type etc
Max support 4CH Replay /Stop/Fast Forward/Fast Reverse at same time
Support x 2,x4,x8,x16. fast forward or fast backward play
User/Admin 2 Levels Different Passwords , support screen lock
TTS Voice Broadcast
Support the TTS Voice Broadcast function
Serial Port Extension
Support kinds of Access Equipment such as LED Advertising, PTZ control, Oil Fuel Sensor,etc.
Adaptive wide power input, support Wide Voltage, Over-load、Over-voltage、Short Circuit、Reverse Protection..Support Time Setting/Delay power off
DC:+8V ~ +33V
UPS Technology,All video information can be saved automatically when the power is cut off, and make sure that all the files can not be damaged.
Normal Working ＜5W Stand-by Status ＜0.5W
“Password Enable”: You can enable or disable password authentication to access the menu.
Modify or setup password of users and the administrator by remote control.
**** ADMIN Pass : 111111, USER Pass : 000000 ****
This menu is to setup device parameters, such as date and time, etc.
“Date Type”: Different date format for choosing.
“Date”: Press the number keys to enter current date.
“Time Synchronization”: calibration mode: GPS, NTP and other school models available.
“Time Zone”: Setup the time zone of the location of the device
“Timeout”: optional remote control does not operate the exit time
“Real Time”: Press the number key to enter the current time
This menu is to setup Power management modes and power distribution.
“Power mode”:press the number keys to select the type, the default is ignition mode.
“Delay Off”: Press the number keys to enter the time, the default is 5 minutes, can be set to 1440 minutes
“Screen time”: Press the number keys to enter the time, the default is 60 minutes, can be set to 0-1440 minutes
“Power On”: Press the number key to enter time, setup the timer start time
“Power Off”: Press the number key to enter time, setup the timer off time
“Import”:Import parameters from HDD or SD Card to current device.Import the system configuration parameters which has set up and restore the factory settings to the factory states
“Export”:Export current device parameters to HDD or SD Card;
“Default”:Default to factory setting; This operation will clear all the setting on the device.
If quantity Devices with same setting,please using Parameter Export/Import for configuration, after setting one device, export these parameters to U-Disk or SD Card then import to other rest devices to be fast setting.
Q:Device keep Rebooting
A:1)Check working power,if low power device will keep rebooting;
2) HDD/SD Card error, remove storage device and turn on device checking;
Q: If the video input interface of the device and camera is different.
A:The DVR is using 4 needle type port, the camera is BNC port or Aviation, if it is different, please use the X-over to connect, or connect according to the DVR Line sequence definition
Q:Device on with HDD but not recording;
A:1)Check SD/HDD if format;if not please enter Main GUI--System Set--Format,format HDD/SD Card;
2)If close Recording ,or set Timed Recording mode, if yes it won’t recording if not the time set
3)If the HDD is connect well, if the HDD/SD light is on.
Q: Video files lost, or there is no video files at a certain period time.
A: 1. Analysis the lost video and ensure the lost time period.
2. Confirm if the DVR was opened at that time, such as crashed midway park, loading and unloading ect. And the device didn’t set the delay recording
Q: Can not control the Car PTZ, can not rotate to all direction.
A: If the agreement and Baud rate of the PTZ is setting right,if the address code is corresponding, if the video channel is setting to max when control the PTZ. Like if is control the first channel, then must set the first channel image to be max.