Mobile DVR for Car

Mobile DVR for Car

The recorder is DC power supply; please attention the positive and negative polar. 2. The voltage is 8V~36V.Do not insert voltage that beyond this range. Under low voltage the recorder doesn’t work, under high voltage will be harm to the...

Product Details

Mobile DVR for Car

Parameter Sheet

Audio Input

4CH ,Aviation Plug

Audio Output

2CH,Front port is earphone port ,rear port connects to BNC connector. The output level: 1V - 2V

Compression

G.726 compression, 8KB/s speed

Alarm Input

8CH IO Alarm Input, 1CH AD input, pulse speed input; Support alarm linkage function

Alarm Output

2CH Relay Alarm Output, Support the linkage acousto-optic alarm, cut off fuel oil/power,etc

Communication Interface

1CH RS232, support extension device, such as POS machine, Oil Feul sensor, LED advertising screen , etc.

1CH 485 interface, can connect PTZ,etc.

Wireless transfer

Support Built-in 3G/4G network, WCDMA,CDMA2000,TDD-LTE,FDD-LTE...

Support Built-in/External WIFI,Compatible with GPRS,EDGE

Position

Support Built GPS/BD Module,can make playback analysis of vehicle routing

G-Sensor

Support G-sensor

Storage

2pieces SD Card,each max 128GB SD Card, mirror recording to protect data from loss


Instruction:

1.  The recorder is DC power supply; please attention the positive and negative polar.

2. The voltage is 8V~36V.Do not insert voltage that beyond this range. Under low voltage the recorder  doesn’t work, under high voltage will be harm to the recorder.

3. Please make sure the recorder is connect with the car power directly. Do not connect with the generator,  the instantaneous voltage will harm to the recorder.

4. The initial power will beyond 30W when the DVR connect with the Camera (the consumed power is  different due to the connect with different device), the power supply must beyond 30W.

5. The power cables must can stand beyond 60W.(For example, when the output voltage of car is 12V,the power cables must can bear 5A or more).

6. Please put the cover on the cables, the cover must be wear-resistant, heat-resistant, water-proof,  grease-proof, in case of short circuit and open circuit.

7. Please install a 10A fuse box near the battery output positive polar for fear of the short circuit will damage the power supply.


User Loading

When the password switch is set to “Off”: The host start and press [OK] key, will direct access to the main menu..

When the password switch is set to “On”: Move the cursor to “landing” column, Press [OK] key, then can enter the main menu.

2312.png


**********************************************************************************

The administrator default password is 111111(or device number –before changed the password available);

User default password is 000000, only have query permissions;

**********************************************************************************

System Main Menu

The main menu includes: Search, System setup, Rec setup, Network setup, Alarm setup and Peripheral, System Information, as below:

2813.png


Q: Remote control not works?

A: Probably of the reasons are as follows:

1.The remote control didn't pack battery;

2.2.The remote control damages;

3.Device damages.


Q: During playback, the map doesn't show?

A: Possible reasons are as follows: Net cable did not connect to PC; Net works, but the computer can not get to the Internet;


Q: When SD card and HDD records, How is the record coverage?

A: SD card and HDD will record circularly for each other. When they are full, they will delete the original video records respectively.



Inquiry