Multifunction Industrail Grade GPS

Multifunction Industrail Grade GPS

Parameters: Instruction: 1 Start up Put the SIM card in place and installed the tracker in the car, the red indicator is on. About 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep...
Chat Now

Product Details

Parameters:

GSM/GPRS Module

SIM900 or SIM900A

GPS sensitivity

-159dBm

GPS accuracy

5 m

Time To First Fix

Reacquisition 0.1s

Cold status 45s

Warm status 35s

Hot status 1s

Work Voltage

DC 9V-30V

Battery

Chargeable changeable 3.7V / 1.2Ah Li-ion battery

Standby work current

< 30mA

Storage Temp.

-40°C to +85°C

Operation Temp.

-20°C to +70°C

Humidity

5%--95% non-condensing


Instruction:

1 Start up

Put the SIM card in place and installed the tracker in the car, the red indicator is on. About 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GSM module is no communication. When the blue indicator is light, the unit has been located.


Main functions

LED Indication

LED Red ,Yellow, Blue flash together, The Device is working normally.

Red LED (Power Indicator): No flash, power supply error, please check The input ,voltage And related wiring status;

Yellow LED (GSM(LBS) Indicator): No flash, GSM(LBS)/GPRS error, please check The SIM Card installation ,SIM Card balance, And GPRS functions, etc.

Blue LED (GPS Indicator): No flash, GPS signal cannot be received, please check that whether anything metal or contain metal block The signal or In The GPS blind zone.

1. Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
2. Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers.

3. Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.

4. Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter.
5. Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.

6. Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.

7. Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.

8. Restart the unit: send SMS to resume the default of unit.

9. Auto Track: You can set up auto track by SMS or on-line positioning platform.

10. Mileage statistics; ACC checking; cutting off power and alarm.

Already insert the picture this one:


Set up

1. Delete authorized number

Send SMS noadmin123456 13612345678. "noadmin" as instruction, "123456" as password, "13612345678" as deleted number. It will reply “noadmin ok!”.

2. Change the Password
Send SMS: “password + old password + space + new password to change the password. For example: Send SMS “Password123456 138138”. "password" as instruction, "123456"as old password, "138138" as new password. Password must be six digits. Tracker’s initial password is 123456.

3. Resume the initial password

If you forget your password, you can resume the initial password 123456.

Send “resumepassword” to the tracker, the tracker will resume the initial password. If there is no authorized numbers, all numbers can resume initial password. If there is already authorized numbers, only the authorized numbers can resume initial password.

4. Control Oil
Send SMS “stopoil+password to control oil. For example send SMS: stopoil123456
"stopoil" as instruction, "123456"as password.
To supply the oil again, send SMS supplyoil+password to the unit. For example, send SMS “Supplyoil123456” to the tracker. "Supplyoil" as instruction, "123456" as the password.

5. Control Circuit
Send SMS “stopelec+password to control circuit. For example send SMS: stopelec123456”.
"stopoil" as instructions, "123456" as the password.
To supply the circuit again, send SMS supplyelec+password to the unit. For example, send SMS “Supplyelec123456” to the tracker. "Supplyelec" as instruction, "123456" as password.

6. Movement alert
Set up: The user can send SMS “Move + password to the unit, then the unit will reply move ok!” .In case of such a movement, it will send SMS “Move” along with a Geo-info to the number.

For example, send SMS “Move123456” to the unit. "Move" as instructions, “123456”as password.
Cancel: Send SMS nomove+password” to deactivate the movement alert.

FAQ:

Q: Can I have a sample order?

A: Yes, we can provide sample to test and check quality. Mixed samples are acceptable.


Q: What is the lead time?

A: Sample is 3-5 days, mass order generally 7-15days depends on the order quantity and your specific requirements.


Q: How to proceed the order if I have logo printing?

A: First, pls provide your Ai file , then Sample picture or sending sample to you for confirmation, finally we will go to mass production.


Q: Do you have any MOQ?
A: Normal our MOQ is 500pcs or normal product .


Q:How to ship the goods and make the payment?

A:Regard the mass production,it is ship by sea or by air,depend on final decision.We accept T/T,L/C,D/A,D/P,Western Union or Money Gram for bulk order

(30% deposit , 70% balance to be paid after inspection)

Paypal is available as well for samples.


Inquiry