Multifunction GPS tracker with fuel sensor
Movement alert 1
Move123456 Move ok
Overspeed alert 1
Speed123456 080 Speed ok
Overspeed alert 2
Nospeed123456 Cancel speed ok
Reboot123456 System will reboot
Auto track 2
Noat123456 Cancel auto track ok
Set call response 2
Monitor123456 Monitor ok
Set auto track mode 2
Web123456 Set web ok
Apn123456 cmnet Set apn ok
Set time zone
Zone123456 8 Set time zone ok
Set ACC open and close interval 2
Accoff 60 Set ACC OFF Interval OK.
Set ACC open and close SMS notify 2
Accnotify 0 Set ACC Notify OK.
Get Google format GPS info
Google GPS info with Google website format
Set reply SMS format
Geosms 1 Set Geo SMS Format OK
GPS+GSM+GPRS wireless network
High sensitive GPS chipset
Built-in GSM&GPS antenna
Built-in ON/OFF power, wide voltage input range
Built-in acceleration sensor for vibration alarm
Support ACC detection, real-time reporting car status
Built-in 450mAh battery for alarm when the power supply is disconnected unexpectedly
Tele-cut off (petrol/electricity) function
SOS button for SOS alarm
Voice monitor function
Built-in CPU, eliminating breakdown automatically
Three LED indicators: GPS-blue; GSM-green; Power-red
Check location via platform
Automatically get address by longitude and latitude.
Multi-function system administrator, edit and manage user conveniently.
Operate terminals based on users privilege to prevent error.
multi-vehicle track replay meanwhile.
Different colors to show vehicle different status: running/stop/alarm/invalid location.
Real time Stat. vehicle status number: monitored qty/unmonitored qty/alarm qty/ located qty/non-located qty.
Grouped display vehicles according to their info or status.
Vehicle alarms or status changes, tracker sends SMS to defined phone to Email.
Historic track can be output by KML, and load by Google Earth.
All kinds’ reports can be output to Html, word, Excel files.
GPS chip SIRF4 chip
GPS sensitivity -159dBm
GPS accuracy 5m
Time To First Fix Cold status 45s,Warm status 35s,Hot status 1s
Build in Battery Chargeable changeable 3.7V 800mAh Li-ion battery
3.HOW IT WORKS
1)Simply insert a GSM sim card into the GPS unit. Whenever you call the unit it will respond with the coordinates of its
2)Location thru a SMS message. You can then use these coordinates on any mapping software (for example Google earth)
3)Which will show where exactly the unit is located.
4)With some little setup, you can also have the device to send the data directly to a computer thru GPRS and display its
5)Location on a map with our bundled software for real-time location tracking.
Q: I CANNOT make it work. Both the tracker and user manual are complicated
A: The tracker comes with a certain technology, but it is a little far away from being told as complicated. About the user manual, it illustrates very detailed on each function, EVEN each correct command you should edit to send to tracker. You just need to spend some little patience reading it over. The user manual will NOT ONLY helps you get familiar with the tracker, BUT ALSO will help you do a CORRECT operation. We are quite sure and very pleased to offer you technical support for any problem, BUT as long as you refer to use manual carefully, you must make it work in perfect condition TOTALLY by yourself. You will enjoy this feeling.
Q: If this tracker can work without a simcard?
A: This tracker is a combination of current GSM network and GPS positioning. A suitable simcard is a FIRST NECESSITY to make it work. These 2 CANNOT work seperately.