GPS Tracker with Video

GPS Tracker with Video

Parameters Instructions: GPS tracker with video Setting the electronic fence can limit the operating range of the device. Once the device is running beyond the setting range, the device will automatically send the information back to the authorization number. GPS tracker with video Set: When the...

Product Details

Parameters

Movement alert 1

Move123456 Move ok

Movement alert 2

Nomove123456 Cancel move ok

Overspeed alert 1

Speed123456 080  Speed ok

Overspeed alert 2

Nospeed123456 Cancel speed ok

Geo fence alert1

Stockade123456 coordinate;coordinate

Geo fence alert 2

Nostockade123456 Cancel stockade ok

Restart tracker

Reboot123456 System will reboot

Enquiry position

Position GPS info

Auto track 1

At30sum5 Auto track set ok

Auto track 2

Noat123456 Cancel auto track ok

Set call response 1

Tracker123456 Tracker ok

Set call response 2

Monitor123456 Monitor ok

Set auto track mode 1

Telephone123456 Set telephone OK

Set auto track mode 2

Web123456 Set web ok


Instructions:

GPS tracker with video Setting the electronic fence can limit the operating range of the device. Once the device is running beyond the setting range, the device will automatically send the information back to the authorization number.

GPS tracker with video936.png 


GPS tracker with video Set: When the car stays in a place for 3-10 minutes, you will be able to send SMS instructions "stockade + password + space + latitude, longitude; latitude, longitude" to the device to set a limited range, once the device is out The device will send the message "stockade! + Latitude and longitude" to the authorization number.

Note: The first latitude and longitude is the coordinates of the upper left corner, the second latitude and longitude is the coordinates of the lower right corner. Once the limit is exceeded, the device will send an alarm message every 3 minutes.


GPS tracker with video Cancel Settings: Send SMS command "nostockade + password" to cancel this function setting.

GPS tracker with video1652.png 

5. Shift alarm

Set: When the device stays in a place for 3-10 minutes, you can send the SMS command "move + password" to the device, and the device will reply "move ok!" Once the device is out of range (the device default distance is 200 meters) , The device will reply to the message "move + latitude and longitude" to the authorization number. Once the limit is exceeded, the device will send an alarm message every 3 minutes.

Cancel Settings: Send SMS "nomove + password" to cancel this feature setting.


6 speed alarm

Set the message: send the SMS command "speed + password + space +080" to the device (assuming the speed is 80km / h), then the device will reply "speed ok!". When the device runs faster than 80km / h, this device will send the message " speed + 080! + latitude and longitude "to the authorization number on. The device will send an alarm message every 3 minutes

Cancel Settings: Send SMS "nospeed + password" to cancel this feature setting.

 

Note: Speed alarm is recommended to set the speed of 30 km / hour or more, if the speed is too low may result in GPS signal drift and not accurate enough.

GPS tracker with video2783.png

 

Off the oil off

1 send the SMS command "stop + password" to the vehicle terminal of the device. After receiving the instruction, the vehicle terminal will perform the oil circuit disconnection operation directly and reply to "Stop engine Succeed". Once the vehicle terminal receives the electrical / oil disconnect command, the vehicle terminal will memorize the status until the center releases the recovery command.

 

2. Restore oil and electricity

Send SMS command "resume + password" to the vehicle terminal, the vehicle terminal to accept the directive, the vehicle directly to the oil circuit disconnection operation, and reply to "Resume engine Succeed". Once the vehicle terminal has been disconnected from the vehicle, the vehicle terminal will remember the status until the center releases the recovery command.


Inquiry