GEO Fence GPS Tracker
Easy to install diagram.
The steps of operating device
Open top cover firstly, Note top cover hasn’t fixed with screws in factory
Please press power switch on the up position (Powered off)
Insert SIM card to the card slot and close well
Please press power switch on the down position (Powered on)
Please close the top cover and fix it with 4 screws.
Connect the power code with the interface of device.
Please require professional technical to connect wires and install in the car properly.
The main SMS commands:
1. Change IP and Port: #6666#IP#18.104.22.168#9891#
2. Set APN: #6666#SAPN#CMNET####
3. Check the parameters: Status#
1. If GPS can not receive the signals normally (there is high building around to interfere with GPS reception), please drive to the open areas for positioning. Generally, it needs 1-3minutes to receive the first coordinates.
2. If GSM can not receive the signals normally, please check whether SIM card is installed correctly or there is no GSM signal at the location you are, such as basement parking, please drive to a place covered by GSM signal reception.
History track Check:
Q1: How many frequency does your device use?
A1: 850MHz 900MHz 1800MHz 1900MHz for global world.
Q2: What network and protocol gps tracker use?
A2: TCP and IP protocol, GSM GPRS Network.