Device Name: CA-P3C
Device Type: Large battery GPS Tracker
Network: 2G GPRS
GPS Chip: UBLOX Chip
GPS Sensitivity: -159dBm
Charger: DC5V 1A
Battery: Rechargeable Li-ion battery
Storage Temperature: -40degrees to +85degrees
Certificate: CE RoHS FCC
GPS Antenna: Built-in Ceramic Antenna
CA-P5C is large battery and long standby time GPS Tracker with 6pcs magnets.
The Storage temperature is from -40 degrees to +85 degrees. And the GSM frequency is quad band, 850MHz/900MHz/1800MHz and 1900MHz.
It can be used for vehicle rental and fleet management. And container, cargo asset tracking.
Via platform or mobile phone app track current GPS position
Check history routes
You can choose the time you want to check, then click playback button to playback the routes the device moves.
Over speed alarm
You can send SMS command,speed123456 080, stands for if speed is more than 80km/h, there will be alarm message to mobile phone number.
After you send SMS command move123456 300, stands for if it moves more than 300meters.there will be alarm message.
This GPS Tracker device is easy to install.
First: you should prepare one 2G GSM SIM Card and open the GPRS internet function.
Second: Insert SIM Card into card slot and the device starts to work.
Third: When GSM module works normally. Please set the IP Port and APN
Forth: After all is ok, if GPS antenna can receive GPS signal, the positioning data will be sent to server. User can check it according to their requirement.
1. Red LED indicator is for power charging status. when you connect it to charger, the LED will be on and after it is charged full, it will be off.
2. Blue LED is for GPS signal indicator, While device searches GPS signal, it will flash, if the LED always is on, stands for device can receive GPS satellite signal.
3. Yellow LED is for GSM signal indicator, While device is searching GSM signal, after it receives GSM signal, it will always be on.
SMS commands Instruction:
SMS Command format: admin+password+space+cell phone number
Via this command set up an authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “ admin ok!” in SMS.
The second admin number setting command: 102#number#
For example: 102#18665990450#
If success, it replies: OK.
The third admin setting (if needed, can setup the third admin number)
SMS Command: 103#number#
Delete administrator number
SMS command format: D101# (this command deletes the first admin number)
If success, it replies: OK
SMS command format: D102# (this command deletes the second admin number)
If success, it replies: OK
Delete the third admin number command is D103#