Mini GPS Tracking Device

Mini GPS Tracking Device

Parameter Model Name: CA-P3C Type: Magnet GPS Tracker Network: GSM/GPRS Band: 850/900/1800/1900MHz GPS Chip: UBLOX Chip GPS Sensitivity: -162dBm Charger: AC110V -220V input DC5V output Battery: 3.7V 5000mAh Storage Temperature: -40degrees to +85degrees Dimension: 80mm*67.9mm*22.3mm Color: Black...

Product Details

Parameter

Model Name: CA-P3C

Type: Magnet GPS Tracker

Network: GSM/GPRS

Band: 850/900/1800/1900MHz

GPS Chip: UBLOX Chip

GPS Sensitivity: -162dBm

Charger: AC110V -220V input DC5V output

Battery: 3.7V 5000mAh

Storage Temperature: -40degrees to +85degrees

Dimension: 80mm*67.9mm*22.3mm

Color: Black

Certificate: CE RoHS FCC

Module: 2G GSM module

Weight: 140g

GPS Antenna: Ceramic Antenna

 

Product Introduction:

CA-P5C is designed with the newest MTK GSM chip and UBLOX GPS chip, and the Storage temperature is from -40 degrees to +85 degrees. The size is 80mm*67.9mm*22.3mm. The battery is 5000mAh rechargeable Li-ion battery. GPS Tracker supports GSM GPRS network, the GPS accuracy is less than 10 meters.

 

Main Features:

1. Check current position and playback history routes. The position data was uploaded to platform server. And these data also were stored in server. So you can check the real time position and history track.

2. Low battery alarm and Geo fence function. When the battery will be used out, it will remind user to charge the battery.

3. Sleeping mode for longer work time. When the device is static status, the vibration sensor can detect this status. And it will go sleep.

4. Over speed alarm for safe driving.

5. Vibration sensor for shake alarm. When you set arm status, if device shakes there will be alarm message to mobile phone number.

 

Product Picture:

P3C-31496.png 

P3C-31498.png 


Installation Instruction:

This GPS Tracker device is easy to install.

First: you should prepare one 2G GSM SIM Card and open the GPRS internet function.

Second: Insert SIM Card into card slot and the device starts to work.

Third: When GSM module works normally. Please set the IP Port and APN

Forth: After all is ok, if GPS antenna can receive GPS signal, the positioning data will be sent to server. User can check it according to their requirement.


LED Indication:

1. Blue LED for GPS signal status

Status of LED

Meaning

Slow flash

If device is searching satellite signal, The LED will flash slowly.

Always is on

When GPS satellite signal is normal, The blue LED will be on.

Off

No power or sleeping mode

 

2. Yellow LED for GSM signal status

Status of LED

Meaning

Slow flash

When you insert SIM Card, the device will start to work, and LED will flash and search GSM signal.

Always is on

After GSM communication signal is ok, the LED will be on.

Off

No power or sleeping mode


3. Red LED for power charging status

Status of LED

Meaning

Always is on

Device is charging and not full

Off

The battery is charged full or power is off

 

SMS commands Instruction:

1. Shake alert: Note: it is effective sending by authorized number

Open shake SMS alert SMS command format: 125#     Reply: OK.

Cancel shake SMS alert SMS command format: 126#    Reply: OK

This command is SMS alert.

2.  Open shake call alert SMS command format: 122#    Reply: OK

Cancel shake call alert SMS command format: 121#   Reply: OK.

This command is call alert.

4. Voice monitor

SMS Command format: 88

First you need to set the authorized number. Then send SMS “88’ to the SIM card number of the device. Then the device will call back you.

Notes: you have to set the authorized number.

 

Factory Picture:

P3C-33435.png 


FAQ:

Question 1: Dose it support movement alert function?

           Yes, there is movement alert function.

Question 2: Where is the best place to install it?

           Any places are ok except the place under metals.

Question 3: Is it 2G module or 3G module?

           This device uses 2G GSM module with MTK Chip.

Question 4: Can I track it via mobile phone app?

           Yes, we have mobile phone app for IOS and android system.


Inquiry