Magnetic GPS Tracker

Magnetic GPS Tracker

Parameters Unit name: CA-P3D GPRS: CLASS12, TCP/IP Battery voltage: 3.7V GPS antenna: ceramic antenna Standby time: 3 months Work mode: 5 work modes Sleep mode: yes CE Certificate: Yes SMS command: Yes Track APP: IOS app and Android app. Product introduction: CA-P5D GPS Tracker is designed with...

Product Details

Parameters

Unit name: CA-P3D

GPRS: CLASS12, TCP/IP

Battery voltage: 3.7V

GPS antenna: ceramic antenna

Standby time: 3 months

Work mode: 5 work modes

Sleep mode: yes

CE Certificate: Yes

SMS command: Yes

Track APP: IOS app and Android app.


Product introduction:

CA-P5D GPS Tracker is designed with UBLOX GPS Chip and MTK GSM chip. The frequency is Quad band. User can use it in any countries.

The GPS accuracy is less than 10meters and the standby current is less than 3uA.

The size is only 64mm*58mm*20mm


Main function:

1. Deep sleeping mode:

SMS command: #6666#MODE#N#

N=105 to 160: stands for when device wakes up and sends positioning data to server every 5 to 60minutes.

For example: “106” stands for every 6minutes device sends one positioning data.

   N=201-224: stands for when device wakes up and sends positioning data every 1 to 24 hours.

   For example: “206” stands for every 6 hours the device will send GPS positioning data to server.

2. Vibration alarm:

#6666#SSA#1#

It means the level is one, and it is the most flexible.

The default level is 2

And the lowest level is 5

#6666#CSA#

It means cancel vibration alarm.


LED Indicator:

1. Red LED: Power indicator LED

LED Status

Meaning

Quick Flash

In Charging

Slow Flashing

Working status

Bright

Wake up status


2. Blue LED: GSM Indicator LED

LED Status

Meaning

Quick Flash

Working normally, uploading data to server

Flashing

Working normally, receive GSM signal ok

Bright

No GSM Signal


3. Green LED: GPS Indicator LED

LED Status

Meaning

Flashing

Working normally, GPS is normally

Bright

No GPS signal


Installation:

This GPS Tracker product CA-P5D is very easy to install.

1. Insert one 2G GSM SIM card and open GPRS function

2. Turn on the battery switch, the device starts to work and search GPS and GSM signal.

3. Close back cover and put it in a secret place. Make sure the GPS antenna side faces up to the sky.


Product Picture:


FAQ:

Question1: Does it have any power cable?

            No, this model has no power cable.

Question2:  The built-in battery is rechargeable?

            Yes, you can choose one rechargeable battery.

Question3:  Does it support vibration alarm?

            Yes, it contains one vibration sensor.

Question4:  Can I set the time interval to 15minutes?

            Yes, the time interval supports 5minutes to 24hours.


Inquiry