GPS Tracker for Cars Magnetic

GPS Tracker for Cars Magnetic

Parameters Device name: CA-P3D Frequency band: GSM 850/900/1800/1900MHz Network: 2G GSM GPRS Current: Less than 3uA GPS Accuracy: 10m Positioning: GPS and LBS Device weight: 130g Work mode: 5 work modes Sleep mode: yes CE Certificate: Yes SMS command: Yes Track APP: IOS app and Android app....

Product Details

Parameters

Device name: CA-P3D

Frequency band: GSM 850/900/1800/1900MHz

Network: 2G GSM GPRS

Current: Less than 3uA

GPS Accuracy: 10m

Positioning: GPS and LBS

Device weight: 130g

Work mode: 5 work modes

Sleep mode: yes

CE Certificate: Yes

SMS command: Yes

Track APP: IOS app and Android app.


Product introduction:

CA-P5D GPS Tracker supports the same protocol with GT06. It uses 2G GSM network. And the frequency band is 850/900/1800/1900MHz. And upload data to server via GPRS of SIM card. The built-in battery is 3000mAh rechargeable Li-ion battery.

 

Main function: 

1. Normal positioning work mode:

The SMS message command is #6666#mode#0#

The default time interval of uploading data to server is 30seconds when it moves.

If it is static for more than five minutes, the device will go to sleeping mode automatically. You can shake it or call the telephone number of this device to wake up it. Of course you also can send SMS to wake up it.

2. You can set fixed time interval to upload data mode:

The SMS message command is #6666#MODE#115#

This command means: each 15mintus the device uploads positioning data one time. Then it goes to sleep.

This mode can make the battery work for longer time. And the battery life will be longer.


LED Indicator:

1. Red LED: Power indicator LED

LED Status

Meaning

Fast flashing

The battery is charging

Slow Flashing

Device is working normally

Continuous bright

It is Wake up status


2. Blue LED: GSM Indicator LED

LED Status

Meaning

Fast Flashing

Device is uploading data to platform via GPRS

Slow Flashing

Working normally, receive GSM signal ok

Continuous bright

No GSM Signal


3. Green LED: GPS Indicator LED

LED Status

Meaning

Flashing

Device can receive GPS signal

Continuous bright

Can not receive GPS signal


Installation:

This GPS Tracker product CA-P5D is very easy to install.

You only need to insert SIM Card into device and turn on the power switch. The device will work automatically.

Pay attention to the Active Button:

If device goes into deep sleeping mode, you can press it to wake up device.

1. When you press it less than one second. The red LED, blue LED and Green LED will be turned on. The GPS module and GSM module starts to work.

2. When you press it more than one second. The red LED turns on first. The GPS module starts to work. Then blue LED and green LED turn on and GSM module starts to work and send positioning data to server.

3. If you need to set alarm mode. Please make sure it receives GPS signal one time. Then the time of device will be current time.


Product Picture:

 

FAQ:

Question1: Does it have any power cable?

            No, this model has no power cable.

Question2:  The built-in battery is rechargeable?

            Yes, it is 3000mAh rechargeable Li-ion battery.

Question3:  It only supports GPS positioning mode?

            No, it supports GPS and LBS dual-mode positioning.

Question4:  Do you have CE certificate?

            Yes, we have. If you have big order, we can do it with your model name.


Inquiry