GPS Magnetic Vehicle Tracker

GPS Magnetic Vehicle Tracker

Parameters Unit name: CA-P3D Frequency band: GSM 850/900/1800/1900MHz Current: Less than 3uA GPS Accuracy: 10m Positioning: GPS and LBS Device weight: 130g Unit size: 64mm*58mm*20mm Color: black Magnetic: Yes Standby time: 3 months Sleep mode: yes Track APP: IOS app and Android app. Product...

Product Details

Parameters

Unit name: CA-P3D

Frequency band: GSM 850/900/1800/1900MHz

Current: Less than 3uA

GPS Accuracy: 10m

Positioning: GPS and LBS

Device weight: 130g

Unit size: 64mm*58mm*20mm

Color: black

Magnetic: Yes

Standby time: 3 months

Sleep mode: yes

Track APP: IOS app and Android app.


Product introduction:

CA-P5D is one no power cable GPS Tracker. The shell is plastic and you can choose magnetic shell. The size is very small 64mm*58mm*20mm, it is very easy to hide.

And the weight is only 130g. And has two positioning modes.


Main function:

1. Real time positioning work mode: there is one work mode, it will always upload positioning data to server in any conditions. Of course the time interval of upload data you can set it according to your requirements.

2. Geo fence alarm: you can set one circle, when device runs in this circle or runs out this circle. There will be one alarm SMS message.

3. Vibration alarm: you can send SMS command to open it. The message is #6666#SSA#1#, The 1 stands for vibration level is 1, the default value is 2, The lowest level is 5.

4. Sleeping mode: you can set normal sleeping mode. The SMS Command is #6666#sleep#9#, 9 stands for after 9minutes it will wake up and upload data. The time you can set it from 0 to 99999, if it is 0, there will be no sleeping mode.


LED Indicator:

1. Red LED: Power indicator LED

LED Status

Meaning

Quick Flashing

The device is charging

Slow Flashing

Normal Work status

Always on

Wake up status


2. Blue LED: GSM Indicator LED

LED Status

Meaning

Quick Flash

Device is uploading positioning data to server

Flashing

GSM signal is normal and device is working

Always on

No GSM Signal


3. Green LED: GPS Indicator LED

LED Status

Meaning

Flashing

Device can receive positioning data

Always on

No GPS signal


Installation:

This GPS Tracker product CA-P5D is very easy to install. The main steps are as following:

First: you need to buy one 2G SIM card with GPRS function.

Second: Insert SIM card and turn on the battery switch, then press the active button.

Third: the GPS antenna side should face up to the sky. And no any metal above the device.

Forth: Please hide it in one secret place avoid someone find it very easy.


Product Picture:

P3D-22429.png 

P3D-22431.png 

P3D-22433.png 

 

FAQ:

Question1: How to track it?

             You can track it via our platform. We can open one account for you.

Question2:  The built-in battery is rechargeable?

            Yes, you can choose one rechargeable battery.

Question3:  If I use your platform, how much is it?

            If you use our platform, the price is 2USD/Unit/Year

Question4:  How much is the built-in battery capacity?

            It uses 3000mAh battery.



Inquiry