Device Name: CA-V2C
Network: 2G GSM
Channel: 20 Channels
Input Voltage: DC9V-100V
GPS Antenna size: 18.6mm*18.6mm*4mm
GPS Antenna: Ceramic antenna
1. Track Position:
User can track the position and speed of the device, and you can also check
Routes for 3 months via your mobile phone or computer.
2. Remote control the engine on or off
When you connect one relay to this device,then you can send SMS Command to
Control the engine on or off. Of course for safety considering, only when the speed is less than 20km/h. the engine will be cut off.
3. ACC detection
On the platform you can check the status of vehicle ignition. You need to connect the green line to the ignition line of your car.
4. Power off alarm
This device contains one built-in battery. When others want to steal your car and remove the power cable of this device, there will be alarm message on the platform.
If you set your mobile phone number as admin number, there will be alarm SMS message to your mobile phone.
5. Over speed alarm
If you need this function, first you need set one speed value, then when it moves more than this speed, there will be alarm on the platform.
1. Red LED:
When it flashes, stands for installation of power cable is correct.
2. Blue LED:
If it always on and not flash, the device can not detect the SIM Card. When it flashes. GSM Signal is normal.
3. Green LED:
When device receives GPS Signal, the green LED will flashes, if no GPS Signal, it always is on.
First: you need to find the best place to hide the device. The GPS Antenna side faces up to sky. And no any metal above the device.
Second: connect the power cable.
Power cable contains 4Lines, Red Line, Black Line, Green Line and Yellow Line
1. Red Line: connects to power positive of the car
2. Black Line: connects to GND.
3. Green Line: connects to Ignition Line
4. Yellow Line: connects to relay