Device Name: CA-V2A
GPS sensitivity: -159dBm
Frequency: Quad band
Accuracy: Less than 5meters
Working environment temperature: -20℃ to +70℃
Working environment Humidity: 20% to 80% RH
Application: Truck or Car
Battery: 180mAh rechargeable
Warranty: one year
Certificate: CE Rosh FCC
Protocol: GT06 protocol
CA-V2A contains the newest APN all over the world. And we can set many functions via SMS commands. It is very easy for different customers. Generally you don't need to set APN command, because it contains most of APNs. If you want to change another server, you only need to send SMS command #6666#IP#new IP#port# to change it, very simple.
1. Apply Voice monitoring
This is one optional function, the SMS Command format: #Password#OM#
For example: #6666#OM#
2. Cancel voice monitoring
SMS command format is #Password#CM#
For example: #6666#CM#
3. Re-start device
SMS command format: #Password#Reset#
For example: #6666#RESET#
Replies: Start Reset System, OK!
It stands for device will be re-started in 8-18seconds.
4. Restore factory setting except IP
SMS Command format: #Password#Factory#
Replies: Resume factory parameter, OK!
It means restore settings to factory standard except IP and port.
1. Power LED indicator: Red LED
Working normally by backup car battery
Working normally by built-In battery and has alarm
Always is on
2. GSM LED Indicator: Blue LED
When device uploads positioning data, the LED will fast flash
Device can search GSM signal
NO SIM card or can not search GSM signal
3. GPS LED Indicator: Green LED
GPS Tracker can search GPS Signal from satellite
NO GPS signal
Sleeping mode or no power
How to install?
1. About the wireless diagram, please refer to instruction.
2. This model uses built-in antenna, make sure the GPS antenna side should face up to the sky. And no any metal above the device. Because if it under one metal, The device can not receive satellite signal better.
3. After you insert SIM card to card slot, make sure turn on the battery switch.
Question 1: How long the built-in battery can work?
Generally it can work about 1-2hours.
Question 2: Can I use my own shell and use your PCB?
Yes, no problem.
Question 3: I want to add some additional functions, can you design it?
We need to know your detailed requirements, then evaluate whether we can do it by this models.
Question 4: Dose it support blind area data?
Yes, it supports 1000pcs blind area data.