GPS Tracking with Temperature Sensor
Digital input details
Digital output details
Cut off fuel/cut off elect
Analog input details
device reply Google link position
google : device reply google link position
Accopenalarm123456 : acc open alarm
opendooralarm123456 : set door alarm
init12345 :init all the settings to factory setting
set tracker SMS password.
set SOS and wiretapping TEL number.
set over-speed value.
set position report time interval.
set GPRS position report mode
fixed time running interval(when vehicle’s running).
Report when car turning.
Static interval (when vehicle’s parking, the time interval is 60times than running interval, this mode could save GPRS traffic and doesn’t affect vehicle alarms. If alarm happens, tracker will report position to platform).
SMS or Platform(GPRS) remotely reboot tracker.
SMS or Platform (GPRS) remotely set server IP, Port.
Directly set parameters with LCD or dispatch handle
Set server IP, port.
GPS Vehicle Tracker Installation
CA-V1 tracker should be installed by technical professional of local service centre. Without permission, the user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
1.Power supply line: The red wire connects 12V“+”;Black wire connects to 12V“-”
2.Wire for cutting off oil of the tracker
Yellow wire connects the relay pin 86; 85 pin connect to 12 V DC , 87 pin and 30 pin in series power supply fuel. Caution: Wrong connection of yellow wire will damage the tracker.