GPS Tracking Chip

GPS Tracking Chip

Parameters: Device Name: CA-V2A Size: 9cm*4.5cm*1.38cm Frequency band: Quad band GPS Accuracy: <5meters Power Supply: DC9.5V to 39.9V Working current: 20mA@DC12V GSM: 850/900/1800/1900MHz Working environment Humidity: 20% to 80% RH Weight: 0.04kg Antenna: Inner GPS antenna GPS Chip: MTK...

Product Details

Parameters:

Device Name: CA-V2A

Size: 9cm*4.5cm*1.38cm

Frequency band: Quad band

GPS Accuracy: <5meters

Power Supply: DC9.5V to 39.9V

Working current: 20mA@DC12V

GSM: 850/900/1800/1900MHz

Working environment Humidity: 20% to 80% RH

Weight: 0.04kg

Antenna: Inner GPS antenna

GPS Chip: MTK Solution

GSM Chip: MTK Solution

Relay: Support 12V/24V

Protocol: GT06 protocol


Product Introduction:

CA-V2A contains Unit host, power cable, Locking bolts and 3M sticker.

And the optional accessories are Relay and built-in battery.

Relay is for controlling engine on or off function.

Built-in Battery is for cut off alarm.

It also contains vibration sensor for vibration alarm.


Message command:

1. Add administrator No 1

Message format: #Password#AAD#1#Cell No#

Replies: ADD admin account 1 OK!

For example: #6666#AAD#1#18665990450#

2. Add administrator No 2

Message format: #Password#AAD#2#Tel phone number#

Replies: ADD admin account 2 OK!

3. Delete admin number 1

Message format: #Password#DAD#1#

Replies: Delete admin account 1 OK!

For example: #6666#DAD#1#

4. Delete admin number 2

Message format: #Password#DAD#2#

Replies: Delete admin account 2 OK!

For example: #6666#DAD#2#

5. View Administrator and Authorized officer numbers

Message command: #Password#VA#

Replies: Display 2 administrators number and 3 authorized numbers

For example: #6666#VA#

6. Setting Password

Message command: #Password#CP#new password#

Replies: change password OK!

For example: #6666#CP#1234#   stands for new password is 1234

7. Restore password

Message command: #Password#RP#

Replies: Reset password OK!

For example: #6666#RP#  restore password to default factory setting

 

Product Display:

V2A-61776.png 

 

V2A-61779.png 

LED Indicator:

1. Blue LED stands for GSM signal status and whether GSM module works normally.

A. Flash quickly: when device uploads position data to server, Blue LED will flash quickly.

B. Flash slowly: when GSM antenna can receive communication signal and GSM module works normally.

C. Dark: stands for sleeping mode or no power.

2. Green LED stands for whether GPS antenna can receive satellite signal.

A. Flash stands for GPS module works normally and GPS antenna can receive GPS signal.

B. Always is on stands for can not receive satellite signal or GPS module is bad.


How to use? 

First: you need to install it to your vehicle, and prepare one 2G GSM SIM card with GPRS function. And please confirm whether the APN has user name and password.

Second: After all is ok, please check whether the GSM and GPS signal is ok.

Third: If device works normally. Please add this device to our platform. And set the IP and port.

Forth: when internet is ok and GPS antenna can receive satellite signal, it will upload position data to server. Then you can track it via our platform.


Application:

 

Factory picture: 

V2A-63075.png 


Inquiry