Technical Parameter:
GPS Module |
GT-1612 |
Working Voltage |
DC9V—80V |
Working Temperature |
-20°C to +70°C |
Functions : ans |
Set the remove sensor ,0 is off;1 is turn it |
Charging2 |
lights off when fully charged |
Real time tracking |
Waterproof GPS Tracker |
angle interval |
Fuel consumption monitoring (Optional) |
Sleep mode |
Check real address name |
GPS Chipset: |
Built-in |
Frequency Bands: |
GSM/GPRS 850/900/1800/1900MHz |
Charge mode: |
Micro USB |
APP Language: |
Chinese/ Danish/ Dutch/ English/ French |
Instructions:
Battery GPS tracker This tracker connects to platform server with TCP. The way for connection is that device connects to the platform server forwardly. After connecting to the platform server, the tracker will pass back a enrolling message. The enrolling message contains the device’s ID. If the device received the answer from the platform server, it will stop to sending enrolling message but send continuous feedback message. The continuous feedback message not contains the device ID. The platform server binds the device by connection. One connection represents a device ID. When the connection cuts off, the device will connect the platform server automatically and send out a device enrolling message. Beside, the device will send out one hand-shaking message intervals of time. The hand-shaking message contains Device ID. After receiving the handshaking answer message from the platform server, the device waits for sending the handshaking message in next period.
NOTE: After the V1.8 agreement, the equipment issued in 12-bit serial number of data packets into : 0 + 11-bit device number(Machine IMEI 11 bit), so that platforms do not need to bind the device depending on the connectivity, according to each packet in the device number to tie fixed equipment, platforms dealing with them will be simpler.
15)FACTORY |
||
Text command |
Parameter |
Sample |
Parameter |
940# |
940# |
Command Description |
Restore the factory setting Only center number can initial this function Factory setting will recover to the original setting |
|
Command Feedback |
Successful Setting:FACTORY OK! |
16)LANG |
||
Text command |
Parameter |
Sample |
LANG Parameter |
LANG1# LANG0# |
LANG1# 1:CHINESE, LANG0#:ENGLISH |
Command Description |
;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting. |
|
Command Feedback |
Successful Setting:SET LANG OK! |
17)WHERE |
||
Text command |
Parameter |
Sample |
WHERE |
988# |
988# |
Command Description |
Check the longitude and altitude and other information of the device |
|
Command Feedback |
Reply with longitude and altitude, speed and IMEL. |
FAQ:
Q1: Battery GPS tracker After inserting a SIM card, it can get SMS command, but it display logoff or offline on the platform and APP.
A: Please check that SIM Card has GPRS data plan.
Q2: Device show online, but it shows “wait for the device responses “when you set instruction with APP.
A: a. Device signal is not good, so not smooth result of GPRS; b. Device is busy.
Q3: Device is not enabled
A: Please check:
1. ID number have not been added to the platform, contact supplier for support.
2. SIM card is not installed correctly
Q4: Position is not accurate
A: The device support two modes of positioning,
GPS is mainly for outdoor positioning, the accuracy is around 10 meters,
LBS is mainly for indoor positioning, the accuracy is around 100-1000 meters.
Q5:Battery GPS tracker Can I brand the items with our own logo/Brand?
Yes, we do provide OEM & ODM service.
Product Function:
Positioning and tracking: to execute the positioning and tracing by the platform or the mobile phone, to get the terminal device operating state. The platform will be determined according to customer requirements;
Over-speed alarm: You can start the alarm function by sending SMS (from mobile phone) to the terminal device. When the vehicle speed is over the setting speed,the device will send a alarm SMS to the administrator;
Obtain longitude and latitude by mobile phone: you can obtain this position data of the vehicle installed this terminal device by the mobile phone;
Set the positioning interval: can set the data transmission interval (from terminal device to the platform) by the mobile phone. You can also set the transmission interval by the platform, depending on whether the platform supports this function.
ACC detection function;
Can identify vehicle ignition state intelligently according to the vehicle battery voltage;
Standard Package:
Main unit 1PCS
GSM antenna 1PCS
GPS antenna 1PCS
Microphone 1PCS
Relay 1PCS
Wiring 1PCS
Additional Info.
Production Capacity 5000PCS/Month
More Specification Origin Guangdong
Trademark TOPTEN
Serial/Model No. TK108
Standard CE, FCC, RoHS
Packing Naturel Package
Trade Terms
Price/Payment T/T, Western Union, Paypal
Shipping DHL/UPS/EMS
Minimum Order 1piece