Model Name: CA-MT06
Product Type: GPS Tracker
Terminal size: 80mm*51mm*26mm
Working temperature: -35degrees to 80degrees
Humidity: 5% to 95%
Accuracy: less than 5 meters
Frequency band: GSM850/900/1800/1900MHz
Magnet: 4pcs magnet
Power consumption: <30uA
MT06 GPS Tracker is one long standby time for three years GPS product. It uses 6600mAh dry battery. And upload one position data each day. Then the power will be off.
The power consumption is less than 30uA when the power is off. And it contains 4pcs coin magnets. Device supports GPS LBS and AGPS position.
1. Positioning monitoring: when being delivered, the main defaults that one piece of position information is submitted every 24 hours, the position information includes the positioning state, the longitude and latitude, the GSM signal intensity, the GPS satellite number, the battery voltage and so on. And the positioning information time interval can be set.
2. AGPS: the terminal has an AGPS function, after the terminal is connected with the GPRS, The AGPS function is available, the positioning speed of the GPS module is accelerated, and the positioning accuracy is improved.
3. Base station positioning: The terminal defaults that GPS positioning is used, and when GPS enters a blind area and accurate positioning is unavailable, the terminal automatically switches to base station positioning. Very precise reference positioning location can be provided through base station positioning.
1. IP and Port setup, if the server IP of a user is 184.108.40.206 and the port number is 8881, the SMS command format is *88*1119147042206*8881# through mobile phone, the terminal replies: success, then the setup is accomplished.
2. TCP/UDP connection mode setup: if the server IP of the user is 220.127.116.11, the port number is 8881 and a TCP connection mode is adopted, edit SMS command *88*1119147042206*8881*1# through the mobile phone, if a UDP connection mode is adopted, edit *88*1119147042206*8881*0# through the mobile phone, the terminal replies: success, then the setup is accomplished.
3. APN Setup: Edit SMS command *88*2+your local APN#, for example: Send SMS command *88*2CMNET#
Notes: CMNET is the APN of China mobile (one of GSM operator in China), APN standards for access point name and differs from country to country. For more information about the local APN, inquire with your local GPRS network operator.
Question 1: How long this device work?
It can work for more than three years.
Question 2: How much is the battery capacity?
The built-in battery capacity is 6600mAh
Question 3: Where is your platform server?
Now our server is in China.
Question 4: How about the standby battery consumption?
It is only about 3uA.